Nine Tenant workload VMs are deployed to different hosts. In this deployment, the VMs are configured as shown in table below.
Host | VM name | Segment | IP address | Gateway | DNS server |
MX740c_Host-1.dell.local | App-1 | App-Segment | 10.10.10.10/24 | 10.10.10.254 | 172.16.11.120 |
Web-1 | Web-Segment | 20.20.20.10/24 | 20.20.20.254 | 172.16.11.130 | |
DB-1 | DB-Segment | 30.30.30.10/24 | 30.30.30.254 | ||
MX740c_Host-2.dell.local | App-2 | App-Segment | 10.10.10.11/24 | 10.10.10.254 | 172.16.11.120 |
Web-2 | Web-Segment | 20.20.20.11/24 | 20.20.20.254 | 172.16.11.130 | |
DB-2 | DB-Segment | 30.30.30.11/24 | 30.30.30.254 | ||
R640_Host-3.dell.local | App-3 | App-Segment | 10.10.10.12/24 | 10.10.10.254 | 172.16.11.120 |
Web-3 | Web-Segment | 20.20.20.12/24 | 20.20.20.254 | 172.16.11.130 | |
DB-3 | DB-Segment | 30.30.30.12/24 | 30.30.30.254 |
- In the vSphere Client, select Hosts and Clusters, then right-click Tenant VM > Edit Settings.
- In the Network adapter, select Applicable segmentfrom the drop-down menu as shown in the figure below.
- Click OK to save the changes.
- Repeat the steps 1 through 3 for the remaining tenant VMs.