To configure the VMware vCenter host nodes as transport nodes for the NSX-T Data Center, perform the following steps:
- In the NSX Manager UI, go to System > Fabric > Nodes > Host Transport Nodes.
- Next to Managed by, select the vCenter from the drop-down menu.
- Select the cluster and click CONFIGURE NSX.
- In the NSX Installation dialog box, select transport-node-profile from the drop-down menu and click APPLY.
The NSX-T configuration starts.
When complete, the NSX Configuration column shows Success and the Node Status shows Up for each host in the cluster. The TEP IP addresses column is populated as well.