To change the fabric, rack, and switch names from their default settings, perform the following steps:
- In the SFS UI for Site 1, click Global Settings > Set Fabric & Switch Name > SET FABRIC & SWITCH NAME.
- On the Network Fabric page, update the fabric Name (recommended) and Description (optional), as shown. In this example, the fabric name is changed to Site01, as shown.
- Click NEXT.
- On the Racks page, update the Name (recommended) and Description (optional) of the racks. In this example, the Site 1 rack names are changed to Rack01 and Rack02, as shown.
- Click NEXT.
- On the Switches page, update the Name (recommended, if not previously configured from the CLI) and Description (optional) of the switches. In this example, the Site 1 switch names are changed from OS10 to those shown in the Name column of the following figure.
- Click FINISH > OK to apply the changes.
- Repeat the steps in this section for the SmartFabric in Site 2. The values used in this deployment example for Site 2 are as follows:
- Network fabric name – Site02
- Rack name – Rack01
- Switch names – S2-Leaf1A, S2-Leaf1B