Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
SmartFabric Services with Multisite vSAN Stretched Cluster Deployment Guide
Notes, cautions, and warnings Introduction Hardware Used in this Guide Topology Deployment Planning SFS switch configuration Configure DCI switches Configure Fabric Interconnects Configure Networks Add ESXi hosts to topology Configure a jump host Deploy the DNS server and the vCenter Server ESXi services and witness host configuration
ESXi services and witness host configuration
Create the data center
Add the services and witness hosts to vCenter
Configure jumbo frames and vMotion network on the services host
Configure jumbo frames and vSAN network on the witness host
Enable NTP on the ESXi services and witness hosts
Deploy the vSAN Stretched Cluster Migrate the vCenter Server and the DNS server Add User VMs Deploy OMNI Validated Components Technical Resources CLI Command Output

ESXi services and witness host configuration

Home > Networking Solutions > Converged and Hyperconverged Solutions > vSAN Networking Solutions > Guides > SmartFabric Services with Multisite vSAN Stretched Cluster Deployment Guide > ESXi services and witness host configuration

ESXi services and witness host configuration

  • In this chapter, the services and witness hosts are added to the vCenter. The vSwitches are configured for jumbo frames, and VMkernel adapters are added.