The following sections provide command output examples from some switches in the completed deployment. The VLANs/virtual networks used in this deployment are shown in the table below for reference.
VLAN/Virtual network | Purpose |
11 | Management |
12 | vMotion |
13 | vSAN |
20 | Optional VM Data network |
50 | Optional Test network, created in OMNI Day-2 automation example |
3939 | SFS default network, not used in this deployment |
4091 | SFS default untagged network for host on-boarding |
Each spine switch and each pair of leaf switches has a VTEP address. VTEP addresses are automatically configured by SFS and will vary. The VTEP addresses shown in the command output examples that follow are shown in the table below.
VTEP IP | Switches |
172.30.0.0 | S1-Spine2 |
172.30.0.1 | S1-Leaf1A/S1-Leaf1B |
172.30.0.2 | S1-Leaf2A/S1-Leaf2B |
172.30.0.3 | S1-Spine1 |
172.32.0.0 | S2-Leaf1A/S2-Leaf1B |