If the jump host has a 1 GbE or 10 GbE NIC, and it is connected to a 25 GbE port on an S5200 series switch, the switch port used must be changed from its native 25 GbE speed to 10 GbE for the port to come up.
If the jump host has a 1 GbE or 10 GbE NIC and is connected to a 10 GbE port on an S4100 series leaf switch, or has a 25 GbE NIC and connects to an S5200 series leaf switch, leave the port at its native speed, skip the following sections, and go to the Configure the jump host interface section.
Note: When in 10 GbE mode, an S5200 series switch port will auto negotiate to 1 GbE when connected to a 1 GbE NIC. To connect a jump host with a 1 GbE BASE-T or 10 GbE BASE-T port to an SFP port on the leaf switch, use a Dell supported SFP-1G-T or SFP-10G-T adapter.