This newly created virtual network is validated with the show virtual-network command on the leaf switches.
The output below from Leaf1A shows that virtual network 30 was created, and the ESXi node interface ethernet1/1/21 and 1/1/22 are members of the virtual network. The output from Leaf1B, not shown, is the same.
S5248-Leaf1A# show virtual-network
Codes: DP - MAC-learn Dataplane, CP - MAC-learn Controlplane, UUD - Unknown-Unicast-Drop
Un-tagged VLAN: 4080
Virtual Network: 30
VLTi-VLAN: 30
Members:
VLAN 30: port-channel1, port-channel1000, ethernet1/1/21, ethernet1/1/22
VxLAN Virtual Network Identifier: 30
Source Interface: loopback2(172.30.0.2)
Remote-VTEPs (flood-list): 172.30.0.1(CP)
The output below from Leaf2A shows that virtual network 30 was created and applied similarly to leaf1A. Interfaces 1/1/21 and 1/1/22 are tagged for the new network. The output from Leaf2B, not shown, is the same.
Replace output:
S5248-Leaf2A# show virtual-network
Codes: DP - MAC-learn Dataplane, CP - MAC-learn Controlplane, UUD - Unknown-Unicast-Drop
Un-tagged VLAN: 4080
Virtual Network: 30
VLTi-VLAN: 30
Members:
VLAN 30: port-channel1000, ethernet1/1/21, ethernet1/1/22
VxLAN Virtual Network Identifier: 30
Source Interface: loopback2(172.30.0.1)
Remote-VTEPs (flood-list): 172.30.0.2(CP)