After successfully creating a template, associate the template with a network.
- From the Templates pane, select the template to be associated with VLANs. In this example, the MX740c with FCOE CNA server template is selected.
Note: With OME-M 1.20.10 and earlier, the Templates option is called Deploy.
- Click Edit Network.
- In the Edit Network window, complete the following:
- To choose FCoE VLANs, select the appropriate Identity Pool list provided, then click Next.
- Assign the bandwidth to the ports and partitions as necessary for your configuration, then click Next.
- From the Untagged Network list, select the untagged VLAN for both ports.
Note: In this example, VLAN0001 is selected.
- For NIC in Mezzanine 1A Port 1, select FC A1 from the Tagged Network list.
- For NIC in Mezzanine 1A Port 2, select FC A2 from the Tagged Network list.
- Click Finish.
The following figure shows the associated networks for the server template with OME-M 1.30.00 and later.
The following figure shows the associated networks for the server template with OME-M 1.20.10 and earlier.