After successfully creating a new template, associate the template with a network. - From the Templates pane, select the template to be associated with VLANs. In this example, the FCOE CNA server template is selected.
Note: With OME-M 1.20.10 and earlier, the Templates option is called Deploy.
- Click Edit Network.
- In the Edit Network window, complete the following:
- Optionally, from the Identity Pool list, choose the desired identity pool. In this example, the Ethernet ID Pool is selected.
- Click Next.
- Assign bandwidth to the ports and the partitions as required by your configuration, then click Next.
- Optionally, from the NIC Teaming option, choose the desired NIC Teaming option.
- The NIC teaming option can be selected as No Teaming, LACP teaming, and Other, as detailed in NIC teaming guidelines.
- For both ports, from the Untagged Network list, select the untagged VLAN. In this example, VLAN0001 is selected.
- For both ports, from the Tagged Network list, select the tagged VLAN. In this example, VLAN0010 is selected.
- Click Finish.
The following figure shows the associated networks for the server template with OME-M 1.30.00 and later.
The following figure shows the associated networks for the server template with OME-M 1.20.10 and earlier.