The following preexisting VLANs/virtual networks are configured in Dell EMC Networking SmartFabric Services Deployment with VxRail.
VLAN/Virtual network ID | Description | Network | Gateway |
4091 | SFS Client Management/VxRail cluster build | 192.168.10.0/24 (default) | None |
3939 | SFS Client Control/VxRail Internal Management | IPv6 multicast | None |
1811 | External Management | 172.18.11.0/24 | 172.18.11.254 |
1812 | vMotion | 172.18.12.0/24 | None |
1813 | vSAN | 172.18.13.0/24 | None |
1814 | VM Network A | 172.18.14.0/24 | 172.18.14.254 (optional) |
1815 | VM Network B | 172.18.15.0/24 | 172.18.15.254 (optional) |
To enable NSX-T traffic, the following additional VLANs, segments, and network addresses are configured in this guide:
VLAN ID | Description | Network | Gateway |
2500 | Host overlay | 172.25.101.0/24 (Rack 1) 172.25.102.0/24 (Rack 2) | 172.25.101.254 (Rack 1) 172.25.102.254 (Rack 2) |
2711 | Uplink01 | 172.27.11.0/24 | — |
2712 | Uplink02 | 172.27.12.0/24 | — |
2713 | Edge overlay | 172.27.13.0/24 | 172.27.13.254 |
— | app-segment | 10.10.10.0/24 | 10.10.10.254 |
— | web-segment | 10.10.20.0/24 | 10.10.20.254 |
App-segment and web-segment are NSX-T segments used by tenant VMs in this deployment example. Traffic on these segments is encapsulated on the overlay networks.