Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking SmartFabric Services Deployment for VMware NSX-T 3.1
Notes, cautions, and warnings Introduction Hardware Overview Topology Deployment Planning
Starting environment
Unsupported environments
VLANs and IP addresses
DHCP server
DNS server records
Configure the VxRail Cluster VDS for NSX-T Traffic Deploy the NSX-T Manager Cluster Configure NSX-T Register the NSX-T Manager Cluster with OMNI Use OMNI to Configure NSX-T Networks on Leaf Switches Add Tenant VMs Show Command Output Validated Components Additional Information

DNS server records

Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > Dell Networking SmartFabric Services Deployment for VMware NSX-T 3.1 > DNS server records

DNS server records


  • Add forward and reverse lookup records on the DNS server using the hostnames and IP addresses used in your deployment. The additional DNS entries for the NSX-T deployment example in this guide are listed in the following table.

     Table 6.  DNS hostnames and IP addresses 
    HostnameIP address
    nsxmgr.dell.lab172.18.11.81
    nsxmgr01.dell.lab172.18.11.82
    nsxmgr02.dell.lab172.18.11.83
    nsxmgr03.dell.lab172.18.11.84
    nsxedge01.dell.lab172.18.11.69
    nsxedge02.dell.lab172.18.11.70
    Note: DNS server configuration steps are not detailed in this guide.
    Note: DNS entries for items in the preexisting VxRail and SFS environment are listed in the  Dell EMC Networking SmartFabric Services Deployment with VxRail 7.0.1 guide.