After NSX-T is configured using the information in the previous chapter, OMNI automatically configures the NSX-T VLANs and BGP routing on the leaf switches.
Several banner messages are displayed in green in OMNI, indicating the NSX-T networks have automatically been created.
The banners indicate all four NSX-T networks have been created, as shown.
(Optional) The switch configuration may be verified at the CLI of the leaf switches with the show vlan command.
The three VxRail nodes in Rack 1 are connected to Eth1/1/1-1/1/3 in this example. The CLI output confirms all VxRail node connected ports are added to the NSX-T VLANs. The leafs in Rack 1 include the host overlay, VLAN 2500, the edge overlay, VLAN 2713, and the edge uplinks, VLANs 2711 and 2712. For the uplink networks, ports on Leaf1A are in VLAN 2711 and ports on Leaf 1B are in VLAN 2712.
Leaf1A# show vlan Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs, @ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated Q: A - Access (Untagged), T - Tagged NUM Status Description Q Ports 2500 Active vlan2500 T Eth1/1/1-1/1/3 T Po1000 2711 Active vlan2711 T Eth1/1/1-1/1/3 2713 Active vlan2713 T Eth1/1/1-1/1/3 T Po1000 4000 Active vlan4000 T Po96-97,1000 4001 Active vlan4001 A Po96 4002 Active vlan4002 A Po97 * 4089 Active vlan4089 A Po1000 4090 Active vlan4090 T Po1000 4094 Active T Po1000 Leaf1B# show vlan Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs, @ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated Q: A - Access (Untagged), T - Tagged NUM Status Description Q Ports 2500 Active vlan2500 T Eth1/1/1-1/1/3 T Po1000 2712 Active vlan2712 T Eth1/1/1-1/1/3 2713 Active vlan2713 T Eth1/1/1-1/1/3 T Po1000 4000 Active vlan4000 T Po96-97,1000 4001 Active vlan4001 A Po96 4002 Active vlan4002 A Po97 * 4089 Active vlan4089 A Po1000 4090 Active vlan4090 T Po1000 4094 Active T Po1000
Since there are no NSX Edges in Rack 2, the host overlay VLAN, VLAN 2500, is the only NSX-T VLAN applied to Leaf 2A and 2B. The VxRail node in Rack 2 is connected to Eth1/1/1 in this example.
The VxRail node in Rack 2 is connected to eth1/1/1 in this example.
Leaf2A# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ - Attached to Virtual Network, P - Primary, C - Community, I - Isolated
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
2500 Active vlan2500 T Eth1/1/1
T Po1000
4000 Active vlan4000 T Po100-101,1000
4005 Active vlan4005 A Po100
4006 Active vlan4006 A Po101
* 4089 Active vlan4089 A Po1000
4090 Active vlan4090 T Po1000
4094 Active T Po1000