- In the left pane of OMNI, under SmartFabric , select the SmartFabric instance.
- In the right pane, select Network > Networks and expand Multi-Rack L3 VLAN .
- The NSX-T VLANs have been automatically imported from NSX Manager, as shown in the following figure.
- Select host-overlay-profile_2500 , and click EDIT .
- On the Edit host-overlay-profile page, enter the values from the first two rows of the following table.
Table 13. NSX-T overlay network configuration Network name VLAN Rack IP addresses Prefix length Gateway IP address Helper address host-overlay-profile_2500 2500 1 172.25.101.252-253 24 172.25.101.254 172.19.11.50 host-overlay-profile_2500 2500 2 172.25.102.252-253 24 172.25.102.254 172.19.11.50 edge-overlay-profile_2713 2713 1 172.27.13.252-253 24 172.27.13.254 — Note: The helper address is the IP address of the DHCP server on the external network. For this deployment example, DCHP and DNS services are both on the same server and share an IP address.
The page appears as shown: - Click EDIT to apply the settings. A green Success message is displayed at the top of the screen.
- Select edge-overlay-profile_2713 , and click EDIT .
- On the Edit edge-overlay-profile page, enter the values from the third row of the previous table.
The page appears as shown:
- Click EDIT to apply the settings. A green Success message is displayed at the top of the screen.