Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—VMware Cloud Foundation 3.x on VxRail
Executive Summary VMware Cloud Foundation on VxRail Product Overview VMware Cloud Foundation on VxRail Deployment Data Center Requirements Use Cases and High-Level Design Cloud Foundation on VxRail Workload Planning Application Dependencies and Routing Decisions Cloud Foundation on VxRail Physical Network Planning VxRail Cluster Deployment Preparation Prepare for VMware Cloud Foundation Management VI Workload Domain Prepare for Cloud Foundation Application Virtual Network
Prepare for Cloud Foundation Application Virtual Network
Capture the Application Virtual Network region settings
Capture settings for BGP peering
Capture settings for Universal Distributed Logical Router
Capture settings for Edge Service Gateways
Capture external router settings for the eBGP peering
Capture Universal Logical Router settings
Capture Region A Management component settings
Capture 2nd site settings for stretched cluster
Prepare for Cloud Foundation VI Workload Domain Cloud Foundation on VxRail Footprints for Sizing Cloud Foundation on VxRail VLANs VxRail Network Configuration Cloud Builder and Management VI Workload Domain Configuration Application Virtual Network Configuration VI Workload Domain Configuration Settings NSX Routing Settings Example Switch Configuration Settings for BGP Peering

Capture Universal Logical Router settings

Home > Integrated Products > VxRail > Guides > Planning Guide—VMware Cloud Foundation 3.x on VxRail > Capture Universal Logical Router settings

Capture Universal Logical Router settings

  • The table ‘Universal Logical Router Settings’ in the section Application Virtual Network Configuration captures the settings and properties for the Universal Distributed Logical Router.

    • The segment range are the values between the starting and ending NSX segments. The value defines the number of VXLAN networks that can be supported by the UDLR
    • The universal multicast address range needs to map to the networking requirements for the UDLR. The default values should work in most cases unless there is a conflict in the data center.
    • The default size of MT