Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—VMware Cloud Foundation 3.x on VxRail
Executive Summary VMware Cloud Foundation on VxRail Product Overview VMware Cloud Foundation on VxRail Deployment Data Center Requirements Use Cases and High-Level Design Cloud Foundation on VxRail Workload Planning Application Dependencies and Routing Decisions Cloud Foundation on VxRail Physical Network Planning VxRail Cluster Deployment Preparation Prepare for VMware Cloud Foundation Management VI Workload Domain Prepare for Cloud Foundation Application Virtual Network
Prepare for Cloud Foundation Application Virtual Network
Capture the Application Virtual Network region settings
Capture settings for BGP peering
Capture settings for Universal Distributed Logical Router
Capture settings for Edge Service Gateways
Capture external router settings for the eBGP peering
Capture Universal Logical Router settings
Capture Region A Management component settings
Capture 2nd site settings for stretched cluster
Prepare for Cloud Foundation VI Workload Domain Cloud Foundation on VxRail Footprints for Sizing Cloud Foundation on VxRail VLANs VxRail Network Configuration Cloud Builder and Management VI Workload Domain Configuration Application Virtual Network Configuration VI Workload Domain Configuration Settings NSX Routing Settings Example Switch Configuration Settings for BGP Peering

Capture settings for Edge Service Gateways

Home > Integrated Products > VxRail > Guides > Planning Guide—VMware Cloud Foundation 3.x on VxRail > Capture settings for Edge Service Gateways

Capture settings for Edge Service Gateways

  • The table ‘Edge Service Gateways’ in the section Application Virtual Network Configuration outlines the network settings for each ESG to enable eBGP peering with the upstream routers.

    Figure 37            Network settings for AVN Edge Service Gateways

    • The individual IP addresses assigned to each uplink must be within the range entered in table ‘eBGP Peering Networks’
    • The IP address for uplink 1 on each ESG must be from the same subnet
    • The IP address assigned to uplink 2 on each ESG must also be in the same subnet
    • Each ESG must be able to connect to the Universal Distributed Logical Router to enable iBGP peering. The IP address entered for the UDLR IP address for each must be in the same range as assigned to the Universal Distributed Logical Router.