Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deployment Guide—Red Hat OpenShift Container Platform 4.2
Introduction Configuring switches Setting up the CSAH Node Deploying OpenShift 4.2 Adding Worker Nodes Deploying Applications Provisioning Storage
Overview
Prerequisites for using NFS
Creating a PV using NFS
Creating a PVC using NFS
Creating a PV using iSCSI LUN
Using iSCSI LUN
Creating a PVC using iSCSI
Creating a pod using NFS PVC
Creating a pod using an iSCSI PVC
Monitoring References

Using iSCSI LUN

Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Archive > Deployment Guide—Red Hat OpenShift Container Platform 4.2 > Using iSCSI LUN

Using iSCSI LUN

  • Before you start using iSCSI LUN, ensure that:

    • OCP 4.2 cluster is up and running
    • iSCSI server is set up (see generic iSCSI setup)
    • Worker nodes in the cluster can reach the iSCSI server and access the iSCSI LUN