Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deployment Guide—Red Hat OpenShift Container Platform 4.2
Introduction Configuring switches Setting up the CSAH Node Deploying OpenShift 4.2 Adding Worker Nodes Deploying Applications Provisioning Storage
Overview
Prerequisites for using NFS
Creating a PV using NFS
Creating a PVC using NFS
Creating a PV using iSCSI LUN
Using iSCSI LUN
Creating a PVC using iSCSI
Creating a pod using NFS PVC
Creating a pod using an iSCSI PVC
Monitoring References

Creating a PV using NFS

Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Archive > Deployment Guide—Red Hat OpenShift Container Platform 4.2 > Creating a PV using NFS

Creating a PV using NFS

  • To create a PV:

    1. Gather the following information:
    • NFS server IP or hostname
    • Path to the share
    • Storage capacity of the NFS share
    1. Create an nfspv.yaml file using the following code. Modify the values of the variables defined between <> as necessary.

    apiVersion: v1

    kind: PersistentVolume

    metadata:

      name: <nfs pv name>

    spec:

      capacity:

        storage: <capacity>

      accessModes:

      - ReadWriteOnce

      nfs:

        path: <nfs share path>

        server: <nfs server ip or hostname>

    1. Create the PV by running the following command:

    oc apply -f nfspv.yaml

    1. Verify that the PV exists by running the following command:

    oc get pv nfspv

    NAME    CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS STORAGECLASS   REASON   AGE

    nfspv   50Gi       RWO            Retain           Available                                   36m