Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deployment Guide—Red Hat OpenShift Container Platform 4.2
Introduction Configuring switches Setting up the CSAH Node Deploying OpenShift 4.2 Adding Worker Nodes Deploying Applications Provisioning Storage
Overview
Prerequisites for using NFS
Creating a PV using NFS
Creating a PVC using NFS
Creating a PV using iSCSI LUN
Using iSCSI LUN
Creating a PVC using iSCSI
Creating a pod using NFS PVC
Creating a pod using an iSCSI PVC
Monitoring References

Prerequisites for using NFS

Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Archive > Deployment Guide—Red Hat OpenShift Container Platform 4.2 > Prerequisites for using NFS

Prerequisites for using NFS

  • Before you start, ensure that:

    • OpenShift Container Platform 4.2 cluster is up and running
    • NFS server is set up, as described in NFS setup
    • Worker nodes in the cluster can reach the NFS server and access the NFS share

    Note: Run the steps for PV and Persistent Volume Claim (PVC) as user core unless directed otherwise.