Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Deployment Guide—Red Hat OpenShift Container Platform 4.2
Introduction Configuring switches
Overview
Customizing the Dell EMC switches
Configuring the Dell EMC switches
Setting up the CSAH Node Deploying OpenShift 4.2 Adding Worker Nodes Deploying Applications Provisioning Storage Monitoring References

Overview

Home > Workload Solutions > Container Platforms > Red Hat OpenShift Container Platform > Archive > Deployment Guide—Red Hat OpenShift Container Platform 4.2 > Overview

Overview

  • This chapter describes where to locate the sample configuration files that Dell EMC has provided and how to customize the files for your environment.

    Typographical conventions

    Configuration instructions in this guide use certain typographical conventions to designate commands and screen output.

    Command syntax is identified by Courier font and enclosed in borders. Information that is specific to your environment is placed inside <> symbols and in italics. For example:

    • Deployment guide command reference: OS10(config)# hostname <S5232F>
    • On the S5248F-ON switch, enter: OS10(config)# hostname <S5248>

    Screen output is presented in bold type.

    Sample configuration files

    The sample switch configuration files are available at openshift-bare-metal. These files enable you to easily configure the switch used for the OpenShift Container Platform cluster.

    1. Clone the repository by running the following command:

    git clone https://github.com/dell-esg/openshift-bare-metal.git

    1. Change to the examples directory.

    Note: If you use different hardware or need different configurations, modify the configuration files correspondingly.