To configure the port-groups, follow the steps below:
- Set breakout port-group 1/1/6 on Z9664-1 for interface 1/1/11 and port-group 1/1/25 on Z9664-2 for interface 1/1/49 to mode Eth 100g-1x for upstream Z9432F-ON switches.
- Set breakout port-group 1/1/3 for port 1/1/5 on Z9664-1 for downstream connection to MX8116n-A1 and port-group 1/1/18 for port 1/1/35 on Z9664-2 for downstream connection to MX8116n-A2 to mode Eth 100g-4x .
- To move a port-group port to default setting or change the speed of the port to a different mode, use port-group 1/1/3 and then no port 1/1/5 command.
Z9664-1 | Z9664-2 |
|
|