Configure the port group for the ethernet interfaces connected to downstream Z9664 switches. Create an internal MGMT VLAN, VLAN-1811 is created for the example of this deployment and is configured as an access VLAN mode on port-channel. In this deployment example, port-group 1/1/10 for port 1/1/19 and port 1/1/20 is breakout 100g-1x and are configured as a member of port-channel 11. Then, save the configuration using running-config to start-up config.
configure terminal
interface vlan1811 no shutdown
interface port-channel11 description To-Z9664 no shutdown mtu 9216 switchport mode access switchport access vlan 1811 port-group 1/1/10 profile unrestricted port 1/1/19 mode Eth 100g-1x port 1/1/20 mode Eth 100g-1x
interface range ethernet1/1/19:1 description To-Z9664-1 no shutdown channel-group 11 mode active no switchport mtu 9216 flowcontrol receive off flowcontrol transmit on
interface range ethernet1/1/20:1 description To-Z9664-2 no shutdown channel-group 11 mode active no switchport mtu 9216 flowcontrol receive off flowcontrol transmit on
write memory
| configure terminal
interface vlan1811 no shutdown
interface port-channel11 description To-Z9664 no shutdown mtu 9216 switchport mode access switchport access vlan 1811 port-group 1/1/10 profile unrestricted port 1/1/19 mode Eth 100g-1x port 1/1/20 mode Eth 100g-1x
interface range ethernet1/1/19:1 description To-Z9664-1 no shutdown channel-group 11 mode active no switchport mtu 9216 flowcontrol receive off flowcontrol transmit on
interface range ethernet1/1/20:1 description To-Z9664-2 no shutdown channel-group 11 mode active no switchport mtu 9216 flowcontrol receive off flowcontrol transmit on
write memory
|