The configuration of Full switch mode Configs must be done on Z9664F-ON FSE switches, which are external rack-mounted switches. For guidance on accessing the CLI and configuring the management interface, see the Dell SmartFabric OS10 User Guide. Find the relevant version of the User Guide in the OME-M and OS10 compatibility table.
This section shows two example deployments. The first example shows a deployment with a compute sled using the 100 GbE BCOM 57508 dual port mezzanine card. The second example shows a deployment with a 25 GbE BCOM 57504 quad port mezzanine card. For the example of this deployment guide, a dual chassis topology has been validated and deployed for both solutions. In this deployment example, the Z9664F-ON has uplinks to a ToR switch pair using the Z9432F-ON. The topology is also mentioned below.