If using Ethernet – No Spanning Tree uplinks, refer to the following table to configure your uplink switches. Configurations for Dell Networking OS10 (S5232F-ON) and Cisco Nexus 9000-series were used for these examples.
Dell Networking OS10 | Cisco Nexus OS |
Global Settings spanning-tree mode RSTP | Global Settings spanning-tree port type edge bpduguard default spanning-tree port type network default |
Port-channel switchport mode trunk switchport trunk allowed vlan xy spanning-tree bpdu guard enable spanning-tree guard root spanning-tree port type edge | Port-channel switchport mode trunk switchport trunk allowed vlan xy channel-group <channel-group-id> mode active |
Interface no shutdown channel-group <channel-group-id> mode active no switchport | Interface switchport mode trunk switchport trunk allowed vlan xy spanning-tree port type edge trunk spanning-tree bpduguard enable spanning-tree guard root |