The upstream switch ports must be configured in a single LACP LAG. This document provides eight example configurations.
- Scenario 1: SmartFabric deployment with S5232F-ON upstream switches with Ethernet - No Spanning Tree uplink
- Scenario 2: SmartFabric connected to Cisco Nexus 3232C switches with Ethernet - No Spanning Tree uplink
- Scenario 3: SmartFabric deployment with S5232F-ON upstream switches with legacy Ethernet uplink
- Scenario 4: SmartFabric connected to Cisco Nexus 3232C switches with legacy Ethernet uplink
- Scenario 5: Connect MX9116n FSE to Fibre Channel storage - NPIV Proxy Gateway mode
- Scenario 6: Connect MX9116n FSE to Fibre Channel storage - FC Direct Attach
- Scenario 7: Connect MX5108n to Fibre Channel storage - FSB
- Scenario 8: Configure boot from SAN