To connect to an IOM console port, first connect to the OME-Modular IP address using SSH using the same credentials used to log in to the OME-M UI.
Use the RACADM command from the MX9002m management module:
racadm connect [-b] -m <module>
-b is for Binary mode.
-m is the Module option. The module option can be one of the following:
- server-<n>: where n = 1 to 8
- switch-<n>: where n = 1 to 6 or <a1 | a2 | b1 | b2 | c1 | c2>
For example:
- Connect to I/O Module 1 serial console:
racadm connect -m switch-1
- Connect to Server 1 serial console:
racadm connect -m server-1