When operating in SmartFabric mode, access to CLI commands is restricted to SmartFabric OS10 show commands and the following subset of CLI configuration commands:
alarm Alarm commands
alias Set alias for a command
batch Batch Mode
boot Tell the system where to access the software image at bootup
clean-reset Boot system mode clean-reset/normal
clear Clear command
cli Cli command
clock Configure the system clock
commit Commit candidate configuration
configure Enter configuration mode
copy Perform a file copy operation
crypto Cryptography commands
debug Debug command
delete Perform a file delete operation on local file system
dir Show the list of files for the specified system folder
disable Turn off privileged commands at a specific level
discard Discard candidate configuration
enable Turn on privileged commands at a specific level
errdisable Reset errdisable settings
event Event commands
exit Exit from the CLI
fefd Reset error disabled interface(s)
generate Command to generate executed functionality
help Display available commands
image Image commands
kill-session Kill a CLISH session
license License and digital fulfillment commands
lock Lock candidate configuration
move Perform a file move/rename operation on local filesystem
no No commands under exec mode
nve NVE Controller exec command
password-change change password for your login credentials
ping ping -h shows help
ping6 ping6 -h shows help
re-balance rebalance
reload Reboot Networking Operating System
show Show running system information
start Activate transaction based configuration
support-assist Support Assist command
support-assist-activity Support Assist related activity
system System command
terminal Set terminal settings
traceroute traceroute --help shows help
uds UDS functionality
undebug Disable debug for all modules
unlock Unlock candidate configuration
validate Validate candidate configuration
write Copy from current system configuration
ztd ZTD Commands.
spanning-tree
disable Disable spanning-tree globally
mac-flush-timer Set the maximum time in which mac flushes will be optimized
mode Spanning tree type to enable
rstp Set rstp port parameters
vlan Select vlan range option