The following configuration example is for the ToR switch pair. The configuration is limited to the minimum basic interfaces and features for connecting to the MX fabric on theMX9116n IOMs.
Home > Networking Solutions > Modular/Blade Switches > MX-Series Modular Switches (PowerEdge MX) > Guides > Dell PowerEdge MX Networking Deployment Guide > Advanced NPAR Quad Port NIC in Full Switch mode
The following configuration example is for the ToR switch pair. The configuration is limited to the minimum basic interfaces and features for connecting to the MX fabric on theMX9116n IOMs.
Configure switch hostname, OOB management IP address, OOB management default gateway, and NTP server IP address.
S5232-1 | S5232-2 |
| |
Interfaces Ethernet 1/1/29 and 1/1/31 are configured as VLTi ports for this example.
S5232-1 | S5232-2 |
| |
Configure the port channel for the ethernet interfaces connected to downstream MX IOMs. Create a generic internal in-band MGMT VLAN, VLAN-1611
. This is created for the configuration example as switch port mode access
on the port-channel. In this example, port 1/1/1 and port 1/1/3 are configured as members of port-channel 20. Save the configuration from running-config to start-up config.
S5232-1 | S5232-2 |
| |