Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44
Introduction Hardware overview Leaf-spine overview Protocols in the leaf-spine example
Protocols used in the leaf-spine examples
Link Aggregation Control Protocol (LACP) overview
Uplink Failure Detection (UFD)
UFD vs. iBGP at the leaf layer
Rapid Spanning Tree Protocol (RSTP)
Routing protocols
Border Gateway Protocol (BGP)
Open Shortest Path First (OSPF)
Virtual Router Redundancy Protocol (VRRP)
Equal Cost MultiPath (ECMP)
Bi-directional forwarding detection
BFD in VLT Domain
BFD for BGP and OSPF
BFD tracking support in VRRP groups
VRRP interface state object tracking
Layer 3 configuration planning Layer 3 with Dell leaf and spine switches OSPF and eBGP Alternate use case scenario Demonstration Appendix A

Routing protocols

Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44 > Routing protocols

Routing protocols

  • Any of the following routing protocols may be used on Layer 3 connections when designing a leaf-spine network.