Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44
Introduction Hardware overview
Hardware overview
Dell Networking S5248F-ON
Dell Networking Z9264F-ON
Leaf-spine overview Protocols in the leaf-spine example Layer 3 configuration planning Layer 3 with Dell leaf and spine switches OSPF and eBGP Alternate use case scenario Demonstration Appendix A

Dell Networking Z9264F-ON

Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44 > Dell Networking Z9264F-ON

Dell Networking Z9264F-ON

  • The Dell PowerSwitch Z9264F-ON is a 2-RU, multilayer switch with 64,100 GbE ports, or up to 128 10/25/40/50 GbE ports using supported breakout cables. The Z9264F-ON is used as a spine switch, as shown in Figure 4.

    Figure 4.   Dell PowerSwitch S9264F-ON