Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44
Introduction Hardware overview
Hardware overview
Dell Networking S5248F-ON
Dell Networking Z9264F-ON
Leaf-spine overview Protocols in the leaf-spine example Layer 3 configuration planning Layer 3 with Dell leaf and spine switches OSPF and eBGP Alternate use case scenario Demonstration Appendix A

Dell Networking S5248F-ON

Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44 > Dell Networking S5248F-ON

Dell Networking S5248F-ON


  • The Dell Networking S5248F-ON is a 1-Rack Unit (RU) multilayer switch with 48x25 GbE SFP28 ports, 4x100 GbE QSFP28 ports, and 2x 200 GbE QFSP28-DD ports. We used two pairs of S5248F- ON switches as leaf switches. Dell PowerSwitch S5248F-ON in the following examples.

    Figure 3.   Dell PowerSwitch S5248F-ON