Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2 > Add the primary VxRail cluster to the workload domain
i Enter 172.16.11.81 for the Cluster Virtual IP address. Enter sfo01wnsx01.sfo01.rainpole.local for the FQDN.
ii Enter 172.16.11.82, 172.16.11.83, and 172.16.11.84 for the three IP addresses and the corresponding FQDNs sfo01w01a, sfo01w01b, and sfo01w01c (prefix sfo01.rainpole.local).
iii For the subnet mask, enter 255.255.255.0
iv Enter the IP address, 172.16.11.253, for the default gateway.
v Enter the admin password for NSX-T.
Figure 25. VI-WLD NSX-T configuration details
Note: The configuration of IP network 172.16.11.0/24 is covered in the creation of the management workload domain. See VCF on VxRail Multirack Deployment using BGP EVPN: Creating a management domain with NSX-V (part 1 of 2).