Introduction

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below

Thank you for your feedback!

VMware Validated Design supports both Layer 2 and Layer 3 network transport. In this section, the details of the Layer 3 leaf-spine topology are provided.
Note: Most of the steps in this section may already be done if all of the configuration steps from the VCF on VxRail Multirack Deployment using BGP EVPN: Creating a management domain with NSX-V (part 1 of 2) deployment guide were followed. To ensure completion, the necessary steps are included in this section.