Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2
Introduction Hardware Overview
Introduction
Dell EMC VxRail E560
Dell EMC PowerSwitch S5248F-ON
Dell EMC PowerSwitch Z9264F-ON
Dell EMC PowerSwitch S3048-ON
Network Transport Topology Planning and Preparation Configure and Verify the Underlay Network Create a VxRail Virtual Infrastructure Workload Domain Configure NSX-T North-South Connectivity Validate Connectivity Between Virtual Machines Validated Components Technical Resources Fabric Design Center Support and Feedback Attachments

Introduction

Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2 > Introduction

Introduction

  • This section briefly describes the hardware that is used to validate the deployment examples in this document. Validated Components contains a complete listing of hardware and software that is validated for this guide.

    Note: While the steps in this document were validated using the specified Dell EMC PowerSwitch models and operating systems, they may be used for other Dell EMC PowerSwitch models using the same networking OS version or later assuming the switch has the available port numbers, speeds, and types.