Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2
Introduction Hardware Overview Network Transport Topology Planning and Preparation Configure and Verify the Underlay Network Create a VxRail Virtual Infrastructure Workload Domain Configure NSX-T North-South Connectivity Validate Connectivity Between Virtual Machines
Introduction
Ping from Web01 to Web02
Ping from Web01 to App01
Ping from Web01 to 10.0.1.2
Ping from App01 to 10.0.1.2
Traceflow App01 to 10.0.1.2
Validated Components Technical Resources Fabric Design Center Support and Feedback Attachments

Ping from Web01 to 10.0.1.2

Ping from Web01 to 10.0.1.2

  • Figure 32 shows the results of the ping that is issued from Web01 (10.10.20.10/24) to the destination address 10.0.1.2, the loopback address on sfo01-spine02.

    Figure 32.     Ping results from Web01 to 10.0.1.2

    Note: If connectivity is needed to the underlay network from the workload tenants, additional IP prefix list will need to be added to the leaf switches. Refer to Configure leaf switch NSX-T overlay networking.