Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
VMware Cloud Foundation on VxRail Multirack Deployment Using BGP EVPN - Part 2 of 2
Introduction Hardware Overview Network Transport Topology Planning and Preparation Configure and Verify the Underlay Network Create a VxRail Virtual Infrastructure Workload Domain Configure NSX-T North-South Connectivity
Introduction
Create transport zones
Create uplink profiles and the network I/O control profile
Create the NSX-T segments for system, uplink, and overlay traffic
Create an NSX-T edge cluster profile
Deploy the NSX-T edge appliances
Join the NSX-T edge nodes to the management plane
Create anti-affinity rules for NSX-T edge nodes
Add the NSX-T edge nodes to the transport zones
Create and configure the Tier-0 gateway
Create and configure the Tier-1 gateway
Verify BGP peering and route redistribution
Validate Connectivity Between Virtual Machines Validated Components Technical Resources Fabric Design Center Support and Feedback Attachments

Create an NSX-T edge cluster profile

Create an NSX-T edge cluster profile

  • Table 11 shows the values that are used for the required edge cluster profile.

    Table 11.        Edge cluster profile settings

    Setting

    Value

    Name

    sfo01-w-edge-cluster01-profile

    BFD Probe

    1000

    BFD Allowed Hops

    255

    BFD Declare Dead Multiple

    3