This section contains the CLI commands to validate the MX9116n FSE.
show switch-operating-mode
Run the show switch-operating-mode command to display the current operating mode.
MX9116n-A1# show switch-operating-mode
Switch-Operating-Mode : Smart Fabric Mode
show discovered-expanders
The show discovered-expanders command is only available on the MX9116n FSE. This command shows how the MX7116n FEMs service tags are attached to the MX9116n FSEs. The command also shows the associated port-group and virtual slot.
MX9116n-A1# show discovered-expanders
Service Model Type Chassis Chassis-slot Port-group Virtual
tag service-tag Slot-ID
-----------------------------------------------------------------------
CBJWLN2 MX7116n FEM CF54XM2 A1 1/1/1 71
show unit-provision
The show unit-provision command is only available on the MX9116n FSE. The command shows the following MX7116n FSE information:
- Node ID
- Unit ID
- Provision Name
- Discovered Name
- State
MX9116n-A1# show unit-provision
Node ID | Unit ID | Provision Name | Discovered Name | State |
---------+---------+----------------------------------+-------|
1 | 71 | CBJWLN2 | CBJWLN2 | up |
(output truncated)
show smartfabric personality
The show smartfabric personality command is used on a node to view the personality of the SmartFabric Services that are configured. The following values are possible:
- PowerEdge MX
- Isilon
- VxRail
- L3 fabric
show smartfabric cluster
The show smartfabric cluster command is used to see if the node is part of the cluster. The command shows the cluster information of the node such as the node role, service, virtual IP address, and node domain. It can also be used to verify role of the node as either the BACKUP or MASTER.
MX9116n-A1# show smartfabric cluster
---------------------------------------------------------
CLUSTER DOMAIN ID : 97
VIP : fde1:53ba:e9a0:de14:0:5eff:fe00:197
ROLE : BACKUP
SERVICE-TAG : 87QLMR2
---------------------------------------------------------
show smartfabric cluster member
The show smartfabric cluster member command is used to see the member details of the cluster. This command shows the cluster member information such as the service tag, IP address, status, role, node type, and the service tag of the chassis where the node belongs to.
MX9116n-A1# show smartfabric cluster member
------------------------------------------- chassis-slot
87QLMR2 ONLINE BACKUP MX9116n CBMXLN2 A1
87QMMR2 ONLINE MASTER MX9116n CF54XM2 A2
show smartfabric details
The show smartfabric details command shows all the details of the configured fabric. The command also displays which nodes are part of the fabric, the fabric status, and the design type associated with the fabric.
MX9116n-A1# show smartfabric details
---------------------------------------------------------------------------
Name: SmartFabric1
Description ID : b16b835e-9c46-4c2b-b1ed-a11269bdea3eDesign
Type : 2xMX9116n_Fabric_Switching_Engines_in_different_chassis
Validation Status : VALID
VLTi Status : VALID
Placement Status : VALID
Nodes : 87QLMR2, 87QMMR2
---------------------------------------------------------------------------
show smartfabric uplinks
The show smartfabric uplinks command is used to verify the uplinks that are configured across the nodes in the fabric. The command shows the name, description, ID, media type, native VLAN, configured interfaces, and the network profile that is associated with the fabric.
MX9116n-A1# show smartfabric uplinks
------------------------------------------------------------------------
Name : Uplink 01
Description ID : ffa4bdfd-fd4a-4301-877a-860c93f9df39
Media Type : ETHERNET
Native Vlan : 1
Untagged-network :
Networks : ec1c6d5e-3945-41c1-92d2-371e5215c911
Configured-Interfaces : 87QLMR2:ethernet1/1/41, 87QLMR2:ethernet1/1/42,
87QMMR2:ethernet1/1/41, 87QMMR2:ethernet1/1/42
------------------------------------------------------------------------
show smartfabric networks
The show smartfabric networks command is used to view the various network profiles that are configured. The command displays the VLANs that are configured, the QoS Priority, and the network type for each network profile.
MX9116n-A1# show smartfabric networks
Name Type QosPriority Vlan
Web_VM_Network GENERAL_PURPOSE SILVER 1614
DB_VM_Network GENERAL_PURPOSE SILVER 1616
VLAN1 GENERAL_PURPOSE BRONZE 1
App_VM_Network GENERAL_PURPOSE SILVER 1615
vMotion VM_MIGRATION PLATINUM 1612
ESXi_Mgmt HYPERVISOR_MANAGEMENT PLATINUM 1611
vSAN STORAGE_DATA_REPLICATION PLATINUM 1613
Host-Overlay GENERAL_PURPOSE GOLD 1617
Edge-Overlay GENERAL_PURPOSE GOLD 1649