Chapters
Symmetrix Remote Data Facility
Installation and Configuration
Testing Recovery Plans
Recovery Operations with 2-site SRDF
Recovery Operations with 3-site SRDF
Technical Notes
Symmetrix Remote Data Facility
Installation and Configuration
-
1Introduction
-
2SRDF SRA with VMware SRM checklist
-
3SRDF SRA prerequisites
-
4Supported SRDF Topologies
-
5Dell Solutions Enabler
-
6Configuring a Solutions Enabler server
-
7Installing the SRDF SRA
-
8enableAutoSSLCertGen.sh
-
9SRDF SRA modification on SRM Appliance
-
10Configuring the SRDF SRA
-
11Array Manager configuration
-
12Configuring SRDF SRA behavior
-
13Modifying logging levels with SRM
-
14Configuring VMAX/PowerMax replicated devices
-
15Device discovery advanced options
-
16Test failover advanced options
-
17Consistency protection with the SRDF/SRA
-
18VMAX/PowerMax device masking requirements
-
19Configuring VMware SRM protection groups
Testing Recovery Plans
-
1Introduction
-
2Test failover workflow in VMware SRM
-
3Test failover Advanced Options
-
4Snap VX and generations
-
5Choosing a test recovery methodology
-
6Testing recovery plans using TimeFinder/SnapVX
-
7Testing recovery plans using TimeFinder/Clone
-
8Test failover without TimeFinder
-
9TestFailoverWithoutLocalSnapshots with Cascaded SRDF/Star
-
10Testing recovery plans using GNS-enabled groups
-
11Test failover with non-VMware devices
-
12Known issues with AutoTargetDeviceReuse=YES
Recovery Operations with 2-site SRDF
Recovery Operations with 3-site SRDF
-
1Introduction
-
2Recovery with SRDF/Star
-
3Recovery after failure of compute environment
-
4Reprotection with SRDF/Star
-
5Recovery with SRDF/Non-Star
-
6Recovery after failure of compute environment
-
7Reprotection with SRDF/Non-Star
-
8Reprotect after Planned Migration
-
9Failback
-
10Failover with non-VMware devices