Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Validation Guide—SAP HANA on Dell EMC PowerEdge for VMware vSAN Hyperconverged Infrastructure
Introduction Technology overview
Introduction
System components
Sizing
CPU and memory
Supported memory configurations
PowerEdge for vSAN Ready Nodes per cluster
SAP HANA VMs per node and per socket
Disks
Network
Configuring SAP HANA virtual machines Solution health monitoring and support References

Introduction

Home > Integrated Products > vSAN Ready Nodes > Guides > Validation Guide—SAP HANA on Dell EMC PowerEdge for VMware vSAN Hyperconverged Infrastructure > Introduction

Introduction

  • SAP has certified this solution on the following PowerEdge models:

    • Two-socket R740xd vSAN Ready Node all-flash HCI
    • Four-socket R840 vSAN Ready Node all-flash HCI

    Note: These are the only models that support SAP HANA workloads. Other vSAN Ready Node models and any hybrid models are not supported in an SAP HANA environment.