Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Planning Guide—VMware Cloud Foundation 5.1 on VxRail
Executive summary VMware Cloud Foundation on VxRail VMware Cloud Foundation on VxRail Requirements and Use Cases VMware Cloud Foundation on VxRail workload domain planning Data center and network requirements Cloud Foundation on VxRail high-level design decisions Cloud Foundation on VxRail Workload Planning Cloud Foundation on VxRail physical network planning Cloud Foundation on VxRail physical network preparation VxRail Cluster deployment preparation Prepare for VMware Cloud Foundation Management VI Workload Domain
Introduction
Provide a temporary IP address for Cloud Builder
Select the settings for the management workload domain
Provide global settings for management VI workload domain
Select virtual distributed switch for NSX overlay networks
Select the settings for NSX host overlay network
Create forward and reverse DNS entries for the management VI workload domain
Select the NSX host overlay VLAN
Select names for resource pools in the management VI workload domain
Prepare passwords
Prepare for Cloud Foundation VI workload domain Prepare for NSX edge gateway services Prepare for Cloud Foundation Application Virtual Network Cloud Foundation on VxRail housekeeping tasks Appendix A: Cloud Foundation on VxRail checklist Appendix B: Cloud Foundation on VxRail footprints for sizing Appendix C: Cloud Foundation on VxRail Networks Appendix D: VxRail network configuration Appendix E: Cloud Builder and management VI workload configuration Appendix F: VI workload domain configuration settings Appendix G: Edge gateway configuration Appendix H: Application virtual network configuration Appendix I: Sample switch configuration settings References

Introduction

Home > Integrated Products > VxRail > Guides > Planning Guide—VMware Cloud Foundation 5.1 on VxRail > Introduction

Introduction

  • To configure the management workload domain, Dell Technologies will follow these steps:

    1. Capture and record the settings specific to the Cloud Foundation management VI workload domain in a workbook.
    2. Download and deploy the Cloud Foundation Cloud Builder virtual appliance on the VxRail cluster.
    3. Upload the settings captured in the workbook for the Cloud Foundation on VxRail instance to the Cloud Builder virtual appliance.
    4. Activate the Cloud Builder process. This process layers the management workload domain on top of the VxRail cluster using the uploaded settings.

    See Appendix E: Cloud Builder and management VI workload configuration for guidance on all the settings that must be collected for Cloud Builder.