Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Multitenancy using VRF with Dell SmartFabric OS10 Implementation Guide > Confirm OSPF neighbors connectivity
Confirm connectivity to OSPF neighbors. The Neighbor ID is the IP address of the loopback interface for each neighboring VRF. Use the following commands:
Rack 1 switch |
Rack-1# show ip ospf neighbor Neighbor ID Pri State Dead Time Address Interface Area -------------------------------------------------------------------------- 192.168.2.1 1 FULL/DR 00:00:30 10.1.1.2 vlan10 0.0.0.0 192.168.2.1 1 FULL/DR 00:00:30 100.1.1.2 vlan100 0.0.0.0
Rack-1# show ip ospf vrf sales neighbor Neighbor ID Pri State Dead Time Address Interface Area ------------------------------------------------------------------------- 172.16.2.1 1 FULL/DR 00:00:31 10.1.1.2 vlan20 0.0.0.0 172.16.2.1 1 FULL/DR 00:00:31 100.1.1.2 vlan200 0.0.0.0
Rack-1# show ip ospf vrf marketing neighbor Neighbor ID Pri State Dead Time Address Interface Area ------------------------------------------------------------------------- 172.17.2.1 1 FULL/DR 00:00:30 10.1.1.2 vlan30 0.0.0.0 172.17.2.1 1 FULL/DR 00:00:30 100.1.1.2 vlan300 0.0.0.0 |