Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Multitenancy using VRF with Dell SmartFabric OS10 Implementation Guide
Introduction Multitenancy Use Cases Validated Components
Dell PowerSwitch S5248F-ON
Switch Configurations Validate Configurations Validate Connectivity Route Leaking Summary Technical Resources

Dell PowerSwitch S5248F-ON

Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Multitenancy using VRF with Dell SmartFabric OS10 Implementation Guide > Dell PowerSwitch S5248F-ON

Dell PowerSwitch S5248F-ON

  • The validated example lab uses the Dell PowerSwitch S5248F-ON for each rack switch. It is a single rack-unit (1U), multilayer switch with 48 25 GbE SFP28 ports, four 100GbE QSFP28 ports, and two 200 GbE QFSP28-DD ports.

    The S5248F-ON uses the Broadcom Trident3 (BCM56873) network processing unit. The S5248F-ON switches are installed with OS10 version 5.4.6.

    A close-up of a keyboardDescription automatically generated with low confidence

    Figure 4.   Dell PowerSwitch S5248F-ON switch front view