Steps to add NVMe/TCP target to the ESXi (Compute) hosts:
- Log in to the vSphere console. Select host > Configure > Storage Adapter and select the NVMe/TCP adapter which was created in the above section.
- After selecting the storage adapter, click Controllers > Add Controller. In the new window update the NVMe/TCP target IP, port number and click Discover Controllers.
Figure 13. Discovering NVMe/TCP targets
- From the list of discovered targets, select the controllers required and click Ok.
- Verify the connected targets under the Controllers tab.
Figure 14. List of NVMe/TCP targets added
- Repeat the steps 1- 4 for the remaining NVMe/TCP adapters on the other compute nodes.