- From the workstation with access to the OOB management network, use a browser to connect to the management IP address any switch in the SmartFabric. Use the syntax, https://switch_mgmt_ip_address.
- Log in as admin. The default password is admin. All web UI configuration is done on the SFS leader switch. If you connect to an SFS switch that is not the leader, a link to the leader is provided. The leader is outlined in red in the following figure.
- If applicable, click the link that is provided to go to the leader switch, and then log in as admin. Alternatively, you can determine the IPv4 address of the SFS leader by running the show smartfabric cluster command from the CLI of any switch in the SmartFabric.
When connected to the SFS leader switch the web UI appears, as shown in the following figure.
- Click the Topology tab to view the topology.