Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking SmartFabric Services Deployment with VxRail 7.0.400
Introduction
Introduction
Purpose of this guide
Dell Technologies
VxRail
SmartFabric Services
SFS UI
OpenManage Network Integration
SFS with VxRail 7.0.400
Typographical conventions
Hardware used in this guide Topology Deployment Planning Configure the First Leaf Switch Pair Deploy First VxRail Cluster Expand to Multirack Add a second VxRail cluster Deploy and Configure OMNI Validated Components CLI Commands Cisco Nexus External Switch Configuration Example Support and Feedback

SFS UI

Home > Networking Solutions > Converged and Hyperconverged Solutions > VxRail Networking Solutions > Guides > Dell Networking SmartFabric Services Deployment with VxRail 7.0.400 > SFS UI

SFS UI

  • The SFS UI now has the same look and feel as OMNI, and it has more capabilities than before. In the SFS UI, you can do the following:

    • View the fabric status, health, and topology
    • Modify port settings - set administrative state (up/down), MTU, enable/disable auto negotiation, configure breakout ports, configure a port for a jump host
    • Create server interface profiles and assign ports to networks
    • Create uplinks including the new multisite fabric interconnect
    • Create networks and configure routing
    • Configure SmartFabric switch global settings - NTP/DNS/SNMP/Syslog servers, modify default fabric settings such as ASNs and fabric IP addresses
    • Restore the fabric from a backup
    • Monitor fabric compliance