Your Browser is Out of Date

Nytro.ai uses technology that works best in other browsers.
For a full experience use one of the browsers below
Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44
Introduction Hardware overview Leaf-spine overview Protocols in the leaf-spine example Layer 3 configuration planning Layer 3 with Dell leaf and spine switches OSPF and eBGP Alternate use case scenario Demonstration Appendix A
Dell networking ONIE switch factory default settings
Validated hardware and operating systems
Technical support and resources
Support and feedback

Validated hardware and operating systems

Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Dell Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10 release 10.5.3.0.44 > Validated hardware and operating systems

Validated hardware and operating systems

  • The following table includes the hardware and operating systems used to validate the examples in this guide.

    Table 3.   Switches and operating systems

    Switch

    OS / Version

    Dell EMC Networking S5248F-ON

    10.5.3.0.44

    Dell EMC Networking Z9264F-ON

    10.5.3.0.44