Overview

Thank you for your feedback!

The PowerScale F910 is a 2U chassis based on the PowerEdge R760. A minimum of three nodes and a maximum of 252 nodes is required to form a cluster. The F910 is node pool compatible with the F900.

The front panel of the F910 has a bezel protecting the 24 NVMe SSD drives, as displayed in the image below. The bezel has an LCD panel providing system information, status, iDRAC IP address and error messages. Removing the bezel provides access to the 24 drives. The LED alarm indicator is located on the left of the front panel.

A figure illustrating the PowerScale F910 node.

Figure 6. PowerScale F910

The following table lists the F910 specifications.

Table 6. PowerScale F910 node specifications

Attribute	PowerScale F910 Specification
Chassis	2U Dell PowerEdge R760
CPU	Dual Socket – Intel Sapphire Rapids 6442Y (2.6G/24C)
Memory	Dual Rank DDR5 RDIMMs 512 GB (16 x 32 GB)
Journal	1 x 32 GB SDPM
Front-end networking	2 x 100 GbE or 25 GbE
Infrastructure networking	2 x 100 GbE
NVMe SSD drives	24
Trusted Platform Module	Yes

The following figure illustrates the F910 node interfaces.

A figure illustrating the backplane of the PowerScale F910.

Figure 7. PowerScale F910 interfaces

Your Browser is Out of Date

Overview

Overview