Home > Storage > PowerScale (Isilon) > Product Documentation > Storage (general) > PowerScale All-Flash F210, F710 & F910 > Overview
The PowerScale F710 is a 1U chassis based on the PowerEdge R660. A minimum of three nodes with a maximum of 252 nodes is required to form a cluster. The F710 is not node pool compatible with the F600.
The front panel of the F710 has a bezel protecting the 10 NVMe SSD drives, as displayed in the image below. The bezel has an LCD panel providing system information, status, iDRAC IP address and error messages. Removing the bezel provides access to the 10 drives. The LED alarm indicator is located on the left of the front panel.
The following table lists the F710 specifications.
Attribute | PowerScale F710 Specification |
Chassis | 1U Dell PowerEdge R660 |
CPU | Dual Socket – Intel Sapphire Rapids 6442Y (2.6G/24C) |
Memory | Dual Rank DDR5 RDIMMs 512 GB (16 x 32 GB) |
Journal | 1 x 32 GB SDPM |
Front-end networking | 2 x 100 GbE or 25 GbE |
Infrastructure networking | 2 x 100 GbE |
NVMe SSD drives | 10 |
Trusted Platform Module | Yes |
The following figure illustrates the F710 node interfaces.