The SFS UI now has the same look and feel as OMNI, and it has more capabilities than before. In the SFS UI, you can:
- View the fabric status, health, and topology.
- Modify port settings - set administrative state (up or down); set MTU; enable and disable auto negotiation; configure breakout ports; configure a jump port.
- Create server interface profiles and assign ports to networks.
- Create uplinks including the new multisite fabric interconnect.
- Create networks and configure routing.
- Configure SmartFabric switch global settings - NTP, DNS, SNMP, and Syslog servers; modify default fabric settings such as ASNs and fabric IP addresses.
- Restore the fabric from a backup.
- Monitor fabric compliance.