This section covers the LAG configuration sample on Leaf1. The same set of commands with their respective unique parameters can be used on BLeaf1 and BLeaf2 while connected to ExtRtr2. This connection is a Layer 2 LAG uplink.
Dell SmartFabric OS10 | Dell Enterprise SONiC |
conf t interface port-channel 1 description LAG-2-Mkt-Node” switchport mode trunk no switchport access vlan switchport trunk allowed vlan 50 vlt-port-channel 15 mtu 9216 no shut exit conf t int range Eth1/1/1-1/1/2 description Link-2-Mkt-Node mtu 9216 channel-group 1 mode active no shutdown end
| conf t interface PortChannel 1 mode active description LAG-2-Mkt-Node switchport trunk allowed vland add 50 mclag 1 mtu 9216 no shut exit conf t int range Eth1/1-1/2 description Link-2-Mkt-Node mtu 9216 channel-group 1 end
|
Note: Port-channel 1 is the LAG configured between the " Marketing” nodes and the leaf switches. The configuration sample does not show Port-Channel 2 or 3, which are the LAGs to the " Engineering” and " Sales” nodes.