This section describes how to verify the vPC configuration, verify the physical interface configuration, and verify that ACI is learning endpoints.
Home > Networking Solutions > Enterprise/Data Center Networking Solutions > SmartFabric OS10 Networking Solutions > Guides > Dell PowerSwitch SmartFabric OS10 with Cisco ACI Deployment Guide > Cisco ACI validation
This section describes how to verify the vPC configuration, verify the physical interface configuration, and verify that ACI is learning endpoints.
Figure 6 shows that the physical, host-connected interfaces in the validated environment are connected directly to the PowerEdge R730xd servers. This section shows how to verify that the physical interfaces from the Cisco ACI fabric to the servers are up and properly configured to enable designated VLANs and EPGs.
To verify the physical interface configuration, perform the following steps: